Robert Perry 28' Classic Launch With Trailer
Built with modern methods
- Barco REF# · 240443
- Eslora total · 8.53m
- Año · 2000
- Construcción · Composite
- Perfíl de carena · Planeo
- Motor · 1 x gasolina 425cv, Marine Power M502 (2001)
- Lugar · Seattle
Este barco está fuera del mercado Aqui hay algunas embarcaciones que siguen en venta
Detalles suplementarios
| Diseñador | Robert Perry |
|---|---|
| Astillero | Schooner Creek Boat Works |
| Lugar | Seattle |
| Capacidad de carburante | 454.6 ltr Total - 2 Tanks |
Sistemas Mecánicos
| Motor | 1 x gasolina 425cv |
|---|---|
| Marca del motor y el modelo | Marine Power M502 (2001) |
| Horas de motor |
motor1= 30 |
| Motor refrigerado por | Indirect |
| Gobierno | rueda |
| Propulsión | Eje/s |
| Helice(s) | 3 blade bronze |
| Consumo de carburante | Desconocido |
This launch is powered by a single 425 horsepower freshwater cooled Marine Power 502 fuel injected gasoline engine coupled to a Borg Warner Velvet Drive Model 20-02-003 v-drive marine transmission. She runs a 1&1/2" diameter Aquamet 22 shaft with Michigan DynaJet 16"X18" nibral prop. All running gear is in "as new" condition with fewer than 30 total engine time. Recently serviced this August.
Dimensiones
| Eslora total | 8.53m |
|---|---|
| LOD | 8.53m |
| Eslora de flotación | 7.95m |
| Manga | 2.13m |
| Calado mín. | 0.61m |
| Calado máx. | 0.61m |
| Desplazamiento | 2,123kg |
| Ubicación/Lugar | En el agua |
Sistemas eléctricos
12 batería de voltios, 2 Carga de baterías por: motor, conexión de tierra
Construcción
| Construction | Composite |
|---|---|
| Perfíl de carena | Planeo |
| Acabado | Pintura acabado |
The hull and deck were produced using a composite sandwich that captures 3/16" Honduran mahogany between layers of epoxy saturated 6 oz e-glass on the outside and 1/2" H80 high density foam coring backed by 1/4" okoume planking and carbon fiber on the inside to make an incredibly strong yet lightweight yacht. Her exterior is finished with six coats of Awlbright high gloss clear polyurethane for beauty and ease of maintenance.
Okoume is a type of Mahogany known for its high strength to weight ratio.
Schooner Creek Boat Works has been a leading builder of custom boats using modern light weight composite systems. They have been in business in Portland, Oregon since the mid 1970's and have a reputation for high quality work.
Interiores
| Aire acondicionado | 1 Aire acondicionado Unidades |
|---|
Following the traditional launch design this boat has luxurious forward and aft seating areas separated by an integral bulkhead. The upholstery is Ultraleather and her soles are solid teak strips. The helm is located forward to starboard and includes comprehensive instrumentation, throttle and shift controls, auxiliary switches and an entertainment system with independently-adjusted speakers in the seating areas. Both seating areas have Heater Craft marine heaters to keep cruisers comfortable in chilly weather. Aft of the second row of seating is the engine hatch and it it followed by a lazarette hatch which gives access to the mufflers, steering quadrant and bilge pump. On the stern is a beautiful teak swim step which is built as an integral part of the hull.
Interiores
Following the traditional launch design this boat has luxurious forward and aft seating areas separated by an integral bulkhead. The upholstery is Ultraleather and her soles are solid teak strips. The helm is located forward to starboard and includes comprehensive instrumentation, throttle and shift controls, auxiliary switches and an entertainment system with independently-adjusted speakers in the seating areas. Both seating areas have Heater Craft marine heaters to keep cruisers comfortable in chilly weather. Aft of the second row of seating is the engine hatch and it it followed by a lazarette hatch which gives access to the mufflers, steering quadrant and bilge pump. On the stern is a beautiful teak swim step which is built as an integral part of the hull.
Equipo de cubierta
| Toldo completo | |
|---|---|
| Cabos | |
| Defensas | |
| Plataforma de baño |
1 Anclas
(13 lb galvanized Danforth)
7.62m de cadena
60.96m de cabo
Steering is hydraulic Vetus
Morse single lever engine controls
Two automatic electric bilge pumps
Bilge blower
Dual Kahlenberg air horns with dedicated compressor
Guest spotlight with helm remote control
Battery charger with shore power connection and 30 amp shorepower cord
Dual group 27 batteries with parallel
Equipo de navegación
| Luces de navegación |
|---|
Equipo de seguridad
| Chalecos salvavidas | |
|---|---|
| Foco pirata | |
| Bocina |
2 Bombas de achique (0 manual / 2 eléctrico)
Comentario del broker
Here is an opportunity to proudly own a gorgeous launch of a classic design in the style of Chris-Craft or Hacker-Craft. She is built of modern materials with a system of composite construction which should give years of trouble free ownership. This is a Robert Perry design and was built by Schooner Creek Boat Works in Portland, Oregon.
While the dual Kahlenberg air horns will command respect in a crowded harbor, the sheer beauty of this long, sleek, elegant nautical gem will be the more powerful attention-getter. And when underway there's nothing like the thrill of smoothly planing with throaty roar of the engine behind, and the spray far aft.
This launch was commissioned by a Seattle businessman and has been in dry storage since new. There are about 30 hours on the engine and it has just come from the shop with fresh oil change, tune-up, and filter changes. Despite its sparkling and new appearance this launch is offered at a fraction of the original cost to design and build.
This launch comes with a custom-built aluminum twin axle trailer.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.