GRP 28ft Motor Sailer
- Barco REF# · 167452
- Eslora total · 8.53m
- Año · 1988
- Construcción · Fibra
- Perfíl de carena · Quilla corrida
- Camas · 2
- Motor · 1 x gasoil 30cv, Nanni ()
- Lugar · Rackheath, Norwich
Este barco está fuera del mercado Aqui hay algunas embarcaciones que siguen en venta
Detalles suplementarios
Lugar | Rackheath, Norwich |
---|---|
Capacidad de carburante | 60.0 ltr Total - 1 Tanks |
Capacidad de agua | 100.0 ltr Total - 1 Tanks |
Sistemas Mecánicos
Motor | 1 x gasoil 30cv |
---|---|
Marca del motor y el modelo | Nanni () |
Horas de motor | Desconocido |
Motor refrigerado por | Indirect |
Gobierno | rueda |
Propulsión | Eje/s |
Helice(s) | 3 blade bronze |
Consumo de carburante | 2.0 ltr /hora A velocidad de crucero |
Velocidad de crucero | 5 nudos |
Dimensiones
Eslora total | 8.53m |
---|---|
Eslora de flotación | 8.53m |
Manga | 2.74m |
Calado mín. | 1.07m |
Calado máx. | 1.06m |
Espacio libre | 1.83m |
Altura interior | 1.85m |
Ubicación/Lugar | Seque almacenamiento |
Sistemas eléctricos
12 batería de voltios, 1 Carga de baterías por: motor, conexión de tierra
Construcción
Construction | Fibra |
---|---|
Perfíl de carena | Quilla corrida |
Acabado | Pintura acabado |
GRP Motor Cruiser based on a Motor Sailor
Interiores
Total # de literas | 2 |
---|---|
No. de literas únicas | 2 |
Camarote(s) | 2 |
2 berths in Fwd cabin
Interiores
Fregadero/Lavabo | |
---|---|
Nevera de hielo | |
Nevera | |
Alfombra/suelo | |
Sistema de agua bajo presión | |
Micro-ondas |
2 berths in Fwd cabin
Equipo de cubierta
Eléctrico molinete
1 Anclas
(Plough)
10.00m de cadena
Equipo de navegación
Corredera | |
---|---|
Radar | |
GPS | |
Navtex | |
Fax | |
Luces de navegación |
Equipo de seguridad
1 Bombas de achique (0 manual / 1 eléctrico)
No BSC
Comentario del broker
This absolutely stunning vessel has been restored to a standard the likes of which I have never seen.
It really is that good. The current owner informs me he bought her as a "project" to work on over the winter 2 years ago. He owns a GRP moulding company within the marine environment and has put 100's of hours in to this boat over the past 2 years. The result really is amazing....She is now 90% finished and requires a gas cooker (microwave already fitted), a little wiring and a BSC to complete her.
My pictures were taken with her inside the workshop where she has sat and I apologise that I cannot do this boat justice.
You really do need to see this boat to appreciate the craftsmanship that has gone in to her. I valued her at 28k finished.
One not to be missed if you are looking for a boat that looks far better than new ever was. There has been a lot of thought gone in to the design in all areas.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.