Bruce Roberts TY43 TRASEA Live Aboard Trawler Yacht
Part Finished Project
- Barco REF# · 236061
- Eslora total · 13.11m
- Año · 2008
- Construcción · Acero
- Perfíl de carena · Desplazamiento
- Motor · 1 x gasoil 210cv, Vetus Deutz DTA66 (2016)
- Lugar · Lancashire
Este barco está fuera del mercado Aqui hay algunas embarcaciones que siguen en venta
Detalles suplementarios
| Diseñador | Bruce Roberts |
|---|---|
| Astillero | Chesterfield Fabrications |
| Lugar | Lancashire |
| Capacidad de carburante | 3,500.0 ltr Total - 2 Tanks |
Sistemas Mecánicos
| Motor | 1 x gasoil 210cv |
|---|---|
| Marca del motor y el modelo | Vetus Deutz DTA66 (2016) |
| Horas de motor | Desconocido |
| Propulsión | Eje/s |
| Helice(s) | 4 Blade |
| Consumo de carburante | Desconocido |
Four Blade Nibral Propellor
50mm stainless steel duplex propshaft
Dimensiones
| Eslora total | 13.11m |
|---|---|
| Eslora de flotación | 11.17m |
| Manga | 4.57m |
| Calado máx. | 1.22m |
| Desplazamiento | 19,898kg |
| Ubicación/Lugar | A tierra |
Construcción
| Construction | Acero |
|---|---|
| Perfíl de carena | Desplazamiento |
| Acabado | Pintura acabado |
Comentario del broker
Fully certified, professional coded fabrication this classic Bruce Roberts just needs finishing off. The project started in 2006 and fabrication started in 2008 in Chesterfield and the final fabrication was completed in 2012 in Situ in Lancashire.
Due to a change in circumstances the present owner is not going to be able to enjoy living on her and sailing around the med. Pretty well everything has been purchased to finish the boat to a high specification and the owner has agreed to finish the boat to a 'Sail Away' condition for £10,000 - £15,000 (Spec to be discussed but includes commissioning by Vetus engineers) which could be done in 8 weeks or less. He could also finish the boat completely to your own specification if you do not want to move the boat until complete.
Here is some of the inventory, (ALL BRAND NEW) Vetus 6.5 KVA silent diesel generator with wheelhouse display, hydraulic power take off, hydraulic tank with 3 take offs, Seaglaze fire rated waterproof engine room door with view panel, Vetus condor hydraulic windlass, 100 metres of 12mm certified galvanised chain, Vetus bow thruster, Vetus hydraulic steering, Seaglaze marine windows and wheelhouse doors, fully spray foam insulated, hardwood internal walls, spiral staircase to lower staterooms and heads, full paio doors to stern, 2 x Vetus escape hatches to master stateroom, all soles fitted, full joton paint scheme, Simrad commercial 18in display with 36in open array radar with tracking, Simrad commercial echo sounder, Simrad commercial chartplotter, Simrad RS87 DVHF commercial marine VHF, Simrad remote commader, 2 x Simrad TV45 marine satellite TV receivers with domes, Raymarine Pal video cameras (two bullet and one dome), Feruno LH3000 intercom/loudhailer with auto foghorn function, Lewmar 25KG stainless steel anchore with matching Lewmar bow fitting, stainless steel deck bollards and cleats, 250mm Francis marine searchlight with cabin control, Scanstrut stainless steel tower and Besenzoni and Cantalupi internal fittings.
The engine has been installed by factory Vetus engineers and will carry a 3 year round the world warranty when commissioned. The boat will have a range of 3000/3500 nautical miles depending upon completed displacement.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.